Architectural Flagpoles

This flagpole is produced from a single aluminium tube, tapered to a smooth and elegant profile. The one-piece construction gives a seamless finish offering the traditional appearance not found in other non-timber poles. To ensure the highest standards of quality, polished cast aluminium cleats, braided marine-grade polyester halyards, machined aluminium tops and durable anodised and powder-coated finishes are used throughout the range.

Features at a Glance:

  • Perfect for prestigious locations
  • One piece, smooth tapered design
  • Traditional good looks
  • Robust construction
  • White powder coated
  • Choice of external or internal (vandal-proof) halyard
  • Hinged or fixed baseplate
  • Traditional truck head, rotating arm or gold finialv

Halyards

Internal - The rope is rigged on the inside of the pole, this gives both security and clean lines. A lockable door gives access and a weighted collar keeps tension on the flag.

External - The rope is rigged on the outside of the pole in the traditional fashion. High quality marine grade cord is used with polished stainless steel fittings.

Ask for a Quote

Rotating Arms

Rotating heads can be fitted to all sizes of Architectural Flagpoles up to 12 metres. The head has a full ball-bearing action to give a sensitive wind response and the flag is held in place with plastic tubular snap rings and a weighted harness. The flag is replaced by lowering the pole on its hinged base.

Wall Mount Brackets

Vertical or angled brackets are available for flagpoles of up to 8m. Made from welded steel with hot dipped galvanised finish, the brackets have a backing plate with holes for three M15 bolts 250mm apart. Standard brackets position the pole 150mm from the wall. Other lengths can be supplied to order.

Base Plates

Fixed or hinged bases are available for all heights of pole. 5-8m have cast aluminium, 10m+ are galvanised steel.

Yardarms & Gaffs

A Yardarm is a horizontal spar pole originally used to carry the sails on square rigged sailing ships. It is now used on Flagpoles to carry ceremonial and courtesy flags.

The Gaff is an angled spar typically used to fly royal or military ensigns. There are many size and rigging options available, each quoted to your requirements.

Height
m		 Base Diameter
mm		 Top Diameter
mm		 Weight
kg		 Max. Flag Size
m2          yds		 Foundation
mm
5 114 60 10 2 2 800 x 600 x 600
6 114 60 13 2 2 800 x 600 x 600
7 114 60 16 3.5 21/2 1000 x 800 x 800
8 114 60 18 3.5 21/2 1000 x 800 x 800
10 165 76 30 4.5 3 1000 x 800 x 800
12 165 76 41 4 4 1500 x 1000 x 1000
15 160 76 250 5 5 1500 x 1500 x 1500
20 220 76 350 6 6 2000 x 2000 x 2000