Wall Mounted Systems

Heavy Duty Wall Mount System


Stainless Steel Tensioner

Wall Mount Bracket

The Heavy Duty Wall Mount system allows banners to be installed projecting at 90 degrees from the wall and has been designed to suit very large banner sizes.

The unit comprises a tough steel wall mount bracket and large 60 mm diameter aluminium arm. Banner installation and change over is made easy with the use of a tension bar. In the standard configuration, this system is suitable for banners with areas up to 5m2. Larger banners can be accommodated using intermediate brackets and stay wires.

Standard Duty Wall Mount System

The standard wall mount system has recently been upgraded with an enhanced bracket and is now available with an optional tensioner to ease fitting, adjusting and renewing the banner. Featuring an attractive circular steel bracket and aluminium arm, the Standard Duty system is suitable for use with banners with areas up to 2m2.

Ask for a Quote
  • Easy to install and adjust
  • Use up to 2m2
  • Use with or without tensioner

Standard Duty Rigid Board System

Now available to suit rigid graphics boards making this a suitable system for permanent installations. A deep section channel secures the board - usually a 3mm Di-Bond panel.

  • Standard graphic width 500mm
  • Bespoke sizes to order
  • Use up to 2m2

Light Duty Wall Mount System


Wall Mount Bracket

This is the ideal budget solution for the wall mounting of banners. Featuring a steel bracket with 25mm diameter arm, the Light Duty system is supplied complete with end cap and collar.

Banners are easily installed or changed by removing the clip connecting the arm to the bracket. Suitable for use of banners with areas up to 1m2.

Heavy Duty Face Fix System


Heavy Duty Bracket

This system enables large banners to be secured flat to a wall with the ability to change and tension the banner easily.

Features heavy duty steel brackets with pre-drilled 16mm fixing holes, 60mm aluminium cross bars, tension bar and stainless steel rigging screws and fittings.

Banners are quickly installed and changed by sliding onto the cross bars and tightening the rigging screws.

Standard Duty Face Fix System

  • Standard Duty version available 45mm bars and aluminuim brackets

Suction Mounted System


Suction Cup

The suction mounted arm is an innovative solution to a common problem, allowing installation of banners where drilling isn't possible or space simply isn't available for a conventional system.

  • Installed in a matter of seconds
  • Suction units are turned on and off with a removable key making them tamper resistant
  • Suitable for use with banners with areas up to 1m2
  • Twin heavy duty suction units with removable locking keys

Note: This is a temporary display solution.

Economy Banner Rail


Banner Rail Assembly

Banner Rail Assembly

Banner Rail Assembly

An ideal and economic way to mount PVC Banners flat to a wall. The Economy Banner Rail is simple. Ideal for installation of a banner to any wall where you need to be able to change the banner on a regular basis.


  • Available in 1m, 2m and 3m Sections fitted together make up to any length
  • Fixings slide in the rail for easy fixing of banner with varying eyelet positions
  • Neat and professional looking installation When changing the banner consistent eyelet heights are important.